Jungheinrich Shuttle UPC Under Pallet Carrier YouTube
Posted on by
Carrier Upc Open. Ultra Pan Carrier® UPC400 Cambro The factory default settings for CCN Ele-ment and CCN Bus number are 1 and 0 respectively NOTES • The UPC Open is intended to be wired directly to one piece of Carrier equipment
UPC Open Installation and Integration Guide from studylib.net
If modifications to the default Element and Bus number are required, both the. Perform the following proce- dure to assign an address: 1
UPC Open Installation and Integration Guide
The UPC Open can communicate using BACnet on an MS/TP network segment communications at 9600 bps. The factory default settings for CCN Ele-ment and CCN Bus number are 1 and 0 respectively Page 9: Wiring The Upc Open For Power The UPC Open is powered by a Class 2 power source.
carrier 50ak Open upc. Simply connect the UPC Open to the BACnet network, and your Carrier equipment is ready to integrate seamlessly into the i-Vu Building Automation System or any other BACnet Building Automation System. To Address the UPC Open Controller — The user must give the UPC Open controller an address that is unique on the BACnet* network
carrier 50ak Open upc. The power and network connections are also protected against transient excess voltage/surge events lasting no more than 10 msec If the UPC Open controller is powered, pull the screw ter- minal connector from the controller's power terminals la- beled Gnd and HOT